🛠️ What Have You Done To Your LC250 Today?

[Mr_Wilson]

New LC 1958 owner here! Recently added a Sherpa roof rack and Diode Dynamics light bar. We went out camping this weekend to try it out with an ARB awning and Ironman 4x4 awning room.

All performed wonderfully, my dog even liked the new rig too!

 

[sigpro220]

Yes, I lost about 2.8 mpg total from the 245/70R18 to the 285/75R18

 

[sigpro220]

yes the LCLC oem flares

 

[TimHerald]

Yes, I lost about 2.8 mpg total from the 245/70R18 to the 285/75R18

I dropped to about 15.5mpg mostly in town but doesn’t seem to vary a lot. Did you lift your LC at all to fit those tires? I went up 2.5” and don’t have much room to spare but do not rub. I know your wheels are another 10mm offset. I am installing 1” Spidertrax tomorrow to get a little wider stance (should take to +35). I feel like I would like +20/25 better but would have to change wheels. Have had an eye out for your GX wheels or the TRD Pro wheels but have found nothing reasonable locally.

 

[sigpro220]

Yes it is lifted 2 .5 as well
I do have full clearance even full compressed
My MPG also is all over the place but I am averaging 18.6 over two tanks. I drive 60 miles a day 65% highway

 

[pv488]

I also ordered the OEM Land Cruiser wider flares to replace my Amazon faux carbon fiber set. They are starting to warp and peel in spots
I found a dealer who sold me all six factory parts for $652 shipped
Just waiting for them to arrive to install

Its crazy how expensive these parts are. I was looking to also order the wider fares for my 1958 but scoffed at the price.

 

[TimHerald]

Added some red traction boards on the OEM roof rails today. Was a bit of a pain finding the right combo of parts to mount with, but ended up with a universal kit that I had to modify just a bit to work.

 

[surfishjoe]

Installed the factory skid plates big improvement over stock and easy to install. $600 for the pair new from shore Toyota.

 

[BMFS33]

Installed the factory skid plates big improvement over stock and easy to install. $600 for the pair new from shore Toyota.

Looks good. Mine just shipped!

 

[fizzlefish]

Added my TCC Bullbar. Purchased it from Long Range America. I had to reach out to TCC for very vague instructions that LRA were creating for this bar. Hardware provided was not correct. I used my best judgement based on pervious bullbar installs and photos of this bumper on other LC250s. All said and done, I am super happy with the look. I still have wiring to finish, swapping out winch cable, installing fairlead, and flip up plate.

 

[RideWithYanu]

Added my TCC Bullbar. Purchased it from Long Range America. I had to reach out to TCC for very vague instructions that LRA were creating for this bar. Hardware provided was not correct. I used my best judgement based on pervious bullbar installs and photos of this bumper on other LC250s. All said and done, I am super happy with the look. I still have wiring to finish, swapping out winch cable, installing fairlead, and flip up plate.

View attachment 52091

Thanks for sharing. Looks so good! As I said on Reddit, I think this bumper style looks so much better with the round headlights, especially in white. Classic Land Cruiser vibes!

 

[DubDub]

Thanks to @jireland I finally put the OEM roof rack on. Thanks again for the easy deal man.

If anyone is interested in the GX prem/lux low profile rails and rack let me know. Thanks to some awesome people in here I am not in the setup for much at all, so I’d basically let it go for some beers and conversation!

 

[ultane]

New LC 1958 owner here! Recently added a Sherpa roof rack and Diode Dynamics light bar. We went out camping this weekend to try it out with an ARB awning and Ironman 4x4 awning room.

All performed wonderfully, my dog even liked the new rig too!

Welcome to the asylum.

 

[t3lcfe]

I will check it out and let you know.
I picked this one mainly for quickly tire rotation at home garage and some stuffs around. Ideally, because of tiny size, minimum weight and super powerful, then it will be with me on off-road trails
Tons of review videos, but here is the short one … 550 ft-lbs!
Man, am I doing free advertising for Milwaukee ? who care…just share good stuffs to our gang

Update: I just love it ! It’s powerful and did help me to do 5-tire rotation for my 2 rigs (G and LC) faster last weekend.

 

[Sounder]

New LC 1958 owner here! Recently added a Sherpa roof rack and Diode Dynamics light bar. We went out camping this weekend to try it out with an ARB awning and Ironman 4x4 awning room.

All performed wonderfully, my dog even liked the new rig too!

Looks awesome! What size awning did you get? I have the same rack setup.

 

[Mr_Wilson]

Looks awesome! What size awning did you get? I have the same rack setup.

I got the largest one 2.5m I think? The awning is built solid and a great purchase!

 

[pv488]

Added ceramic window tint to windshield and front windows. Wanted to match the back window tint from factory.

 

[ultane]

Added window tint to windshield and front windows. Wanted to match the back window tint from factory.

When you get some extra change, adding ceramic film to the rest of the truck will greatly reduce heat gain.

 

[ERROR504]

Thanks to @jireland I finally put the OEM roof rack on. Thanks again for the easy deal man.View attachment 52101

If anyone is interested in the GX prem/lux low profile rails and rack let me know. Thanks to some awesome people in here I am not in the setup for much at all, so I’d basically let it go for some beers and conversation!

Love the oem half rack..personally think it’s the best looking one available. I ended up getting the extra rail bc it would bother me seeing the empty slot from my window

 

[teghogh]

Love the oem half rack..personally think it’s the best looking one available. I ended up getting the extra rail bc it would bother me seeing the empty slot from my window

I’d does look nice but I like the 4Runner trail hunter version much better . I wonder if the two are interchangeable