🛠️ What Have You Done To Your LC250 Today?

After 2+ weeks of driving on heavily salted roads, I tried to unsalt all of our vehicles as best I could. Will probably do it again in a few weeks. Not sure my truck will ever be the same. Used a garden type sprayer and then a foam cannon to try to get everywhere - then regular washes. I am definitely doing a full woolwax covering on the 250 next fall.
We're needing that elusive big rain to douche the roads of the salt. Mine are parked in the car barn awaiting rain
 
We're needing that elusive big rain to douche the roads of the salt. Mine are parked in the car barn awaiting rain
100% right. I have to be in Nashville all this week and then NZ for 2 weeks - so just wanted to try to do a little to get ahead. Hopefully tonight and tomorrow will help wash some away.
 
Got some steelies for designated winter wheels.
 

Attachments

  • IMG_2621.webp
    IMG_2621.webp
    498.6 KB · Views: 359
Installed the Fuel & Fire sunglass cubby. Purchased through our friend @StickerFab.

Installation was a breeze. Fit and finish are great, looks like it could even be OEM. The only logo on the product is inside the cubby, you can see it in the second photo. The felt liner inside keeps the glasses from sliding around too much. Since I wear Rx glasses daily, this was a major quality of life upgrade. Can easily recommend.

My daily driving sunglasses are a pair of large aviators (non-polarized so I can see the HUD). If they can fit, it should be able to fit nearly any eyewear.

IMG_1667.webp


IMG_1668.webp
 
Installed the Fuel & Fire sunglass cubby. Purchased through our friend @StickerFab.

Installation was a breeze. Fit and finish are great, looks like it could even be OEM. The only logo on the product is inside the cubby, you can see it in the second photo. The felt liner inside keeps the glasses from sliding around too much. Since I wear Rx glasses daily, this was a major quality of life upgrade. Can easily recommend.

My daily driving sunglasses are a pair of large aviators (non-polarized so I can see the HUD). If they can fit, it should be able to fit nearly any eyewear.

View attachment 60056

View attachment 60057
$60 for that is insane. Very basic design that requires little effort. I applaud them for finding the market for this
 
Installed some First Edition fender flares on my 1958 last pictures are comparison of the FE flare and the 1958 flare. They are about 1/2 inch wider.
 

Attachments

  • IMG_0773.webp
    IMG_0773.webp
    79.7 KB · Views: 217
  • IMG_0774.webp
    IMG_0774.webp
    127.8 KB · Views: 178
  • IMG_0771.webp
    IMG_0771.webp
    43.7 KB · Views: 175
  • IMG_0772.webp
    IMG_0772.webp
    105.3 KB · Views: 181
  • IMG_0781.webp
    IMG_0781.webp
    272 KB · Views: 197
  • IMG_0780.webp
    IMG_0780.webp
    253.9 KB · Views: 194
  • IMG_0784.webp
    IMG_0784.webp
    269.6 KB · Views: 195
  • IMG_0782.webp
    IMG_0782.webp
    279.2 KB · Views: 245
Installed a full length Wescott modular roof rack.
 

Attachments

  • IMG_7126.webp
    IMG_7126.webp
    493.4 KB · Views: 245
  • IMG_7124.webp
    IMG_7124.webp
    437.1 KB · Views: 233
Picked up some skids from RCI during the Presidents’ Day sale they had. Install expected this weekend! I'm about done with armor until it's time to do the bumpers hopefully a number of years down the line. I may have to put a partial bumper on for a winch but I worry about adding more weight without upgrading the front suspension to handle the extra weight.

Should be a fun Saturday project.

IMG_5494.jpeg
 

Attachments

  • IMG_5497.webp
    IMG_5497.webp
    149.2 KB · Views: 180
  • IMG_5496.webp
    IMG_5496.webp
    155.9 KB · Views: 136
  • IMG_5495.webp
    IMG_5495.webp
    201.9 KB · Views: 160
What have you done to your Land Cruiser 250 recently?
i just finished installing some sleek rock sliders and a low profile roof rack to get it ready for some trail runs this weekend because the stock setup felt a little too vulnerable for the rocky terrain i usually hit it is a blast seeing how many different ways people are personalizing these new rigs and i am already planning on adding some high output fog lights to the front bumper next month

the new chassis handles the extra weight really well but i am still being careful about the finish while it sits in the driveway between trips since my garage is full of tools right now i actually had a similar struggle keeping my daily driver clean from the elements and a buddy of mine ran into the same issue with his project car until he found some great camaro covers here that really helped him out
 
I Installed diode dynamic fog lights in my wife’s 1958. Followed the YouTube video and it went extremely well. I ordered the white ones because my wife said no to the ambers. I did not realize the daytime running lights are amber and she was not happy! I think it looks great however the amber matches the corner lights. Flipping the fog light switch they turn to bright white and have a nice cut off though I didn’t get a chance to test them at night only in the garage.
 

Attachments

  • IMG_7136.webp
    IMG_7136.webp
    180.6 KB · Views: 153
  • IMG_7137.webp
    IMG_7137.webp
    285.3 KB · Views: 148
  • IMG_7138.webp
    IMG_7138.webp
    436.6 KB · Views: 154
  • IMG_7139.webp
    IMG_7139.webp
    284.3 KB · Views: 144
  • IMG_7140.webp
    IMG_7140.webp
    340.8 KB · Views: 143
  • IMG_7141.webp
    IMG_7141.webp
    189.9 KB · Views: 164
  • IMG_7142.webp
    IMG_7142.webp
    65.3 KB · Views: 168
+1 for the Rubi-Grid. Just the cell phone for now but I’m going to put another arm to hold a tablet for off highway GPS. Super easy install.
What device holder is that from bullet point mounting? Is it a magnetic holder and if so how strong is it?
 
Finally got around to finishing the lower link skid rears and the rear shock skids.
 

Attachments

  • IMG_5533.webp
    IMG_5533.webp
    83.8 KB · Views: 163
  • IMG_5534.webp
    IMG_5534.webp
    154.5 KB · Views: 147
  • IMG_5535.webp
    IMG_5535.webp
    186.3 KB · Views: 158
  • IMG_5536.webp
    IMG_5536.webp
    182.8 KB · Views: 196
What device holder is that from bullet point mounting? Is it a magnetic holder and if so how strong is it?
Qi Charger non fan version. Seems like the rest, good not perfect. The last one I had from a different manufacturer aligned my phone over. I also haven’t tried the charging function yet.
 
Supporting Vendors View all →
StickerFab
Back
Top Bottom