🛠️ What Have You Done To Your LC250 Today?

[MaximusLC]

This looks amazing. Chef’s kiss.

 

[MaximusLC]

Thx! I was gonna do 21overlay but saw one on eBay using the same photos etc. it was about $110. Made an offer of $60 shipped and they took it. Was at a US company and received it today and ordered Wed night. So 48 hours. For $60, I can throw it away if it doesn’t hold up. Fit was perfect though. Now I need to whiteout my Toyota logo like I did on the back.

Man, this looks perfect. If you were bored and wanted to message me the eBay listing I would owe you a great debt.

 

[TimHerald]

Man, this looks perfect. If you were bored and wanted to message me the eBay listing I would owe you a great debt.

Sent you a link. There are tons of them on eBay now.

 

[BigMF]

Installed an unorthodox ground/negative distribution block. Didn't want to get one of those standard power distribution blocks from Amazon that was like 6" long and require 2 bolts to hold in place. So, got this battery terminal clamp from Amazon instead that had 6 posts on top and 6 ports on the side for larger gauge wires:

Installed it by using a M6-1.00 x 45MM bolt to replace the OEM bolt that was holding the front, bottom "leg" of the air box. The bolt provides the electrical connection to the chassis and no need for a seperate wire from the chassis to the block.

Will probably not use it for any "high powered" but it works fine for my LED light bars and onboard air compressor.

 

[EOD Guy]

OK, hands down that is the cleanest solution for a ground buss, I've ever seen!

Might just have to steal that idea.

 

[ch78]

I took a bunch of parts off then added the Ark crash bracket delete to add a bit of extra room. Only down side is I can’t use the OE mud flaps so I ordered the Ark micro flares.

 

[BigMF]

OK, hands down that is the cleanest solution for a ground buss, I've ever seen!

Might just have to steal that idea.

High praise indeed, coming from @EOD Guy !

 

[LC250 Costa Rica]

Could be this ....

https://www.aliexpress.us/item/3256808458092022.html?ug_edm_item_id=1005008644406774&edm_click_module=item_detail&edm_log_data=edm-item-list-one-column.store-product-log-link&tracelog=rowan&rowan_id1=aeug_edm_84139_1_es_ES_2025-07-25&rowan_msg_id=3270biz_search_product%3A0%3A0_578459984%24f7fe8d1b7a8a42049d072ea74ca7ee2a&ck=in_edm_other&mem_info=z4VV3Z2zHEiKDUrf0w%20E1g%3D%3D-100103-aeug_edm_84139-zASxVgzphB7cmOcfDh%2FdZxQnNTggIX1QZYQ2KHVfcZ8%3D&gatewayAdapt=glo2usa4itemAdapt

 

[evillinux]

Added some red Victory 4x4 red recovery points to the LC today replacing the stock ones. I saw some other folks posting about this version and/or red ones and always want to add some to my Tacoma (maybe someday) but found the LC setup was easy and took all of like 10 minutes.

On a side note, I found another post mentioning ladders and saw this specific half-ladder: 2024 - 25 Toyota Land Cruiser/Prado 250 Rear Half Ladder | NashFabCo and was curious if anyone bought and installed it? The main reason why I'm interesting in it that the company also makes a dual-jerrycan holder that can be installed on it and that honestly is the main purpose I'm looking for it. There a few times that I go out to semi-remote spots and having a jerrycan of gas just gives me a bit of piece of mind so that the honest reason I'm leaning towards it. I'm not a fan of the rotopax/window mounts that I know a couple other companies make that connect to their roof racks (I have the OEM LC roof rack) which is why leaning towards this solution unless anyone done anything else potentially? Thanks!

 

[Nor Cal Cruiser]

More farkles: https://www.amazon.com/dp/B0D9NZH44D?tag=landcruiserforum-20

 

[CaryGX550]

Added some red Victory 4x4 red recovery points to the LC today replacing the stock ones. I saw some other folks posting about this version and/or red ones and always want to add some to my Tacoma (maybe someday) but found the LC setup was easy and took all of like 10 minutes.

On a side note, I found another post mentioning ladders and saw this specific half-ladder: 2024 - 25 Toyota Land Cruiser/Prado 250 Rear Half Ladder | NashFabCo and was curious if anyone bought and installed it? The main reason why I'm interesting in it that the company also makes a dual-jerrycan holder that can be installed on it and that honestly is the main purpose I'm looking for it. There a few times that I go out to semi-remote spots and having a jerrycan of gas just gives me a bit of piece of mind so that the honest reason I'm leaning towards it. I'm not a fan of the rotopax/window mounts that I know a couple other companies make that connect to their roof racks (I have the OEM LC roof rack) which is why leaning towards this solution unless anyone done anything else potentially? Thanks!

Someone on the GX Forum called out that these Taco/4R front recovery points are compatible with GX/LC. Part #PT974-35250. I got a pair on sale for $107 delivered and they look nice. 10 min installation.

 

[TimHerald]

Door lock covers - I am addicted to stupid trinkets I guess.

 

[evillinux]

Door lock covers - I am addicted to stupid trinkets I guess.

I think I need this in my life also if you have a link or location where you got it. That is neat looking, adds a nice little subtle labeling, I'm a sucker for items like this.

 

[TimHerald]

I think I need this in my life also if you have a link or location where you got it. That is neat looking, adds a nice little subtle labeling, I'm a sucker for items like this.

https://www.amazon.com/dp/B0DJ6QBY4W?tag=landcruiserforum-20

 

[Minttedd]

I ordered an XTool D8s.

 

[BigMF]

Finished my DV8 bumper/winch/onboard compressor project. More details on my build page and thread related to the compressor install. Very happy with the results.

 

[PurelyAbrasive]

Today I installed my Meso Courtesy Lights. They are switched from white to red.

 

[Hawaiian In Town]

For fear of stones hurtling down the highway towards our unprotected radiators, I've installed these guards from Big A "LC250 Grille Guards"

Ice learned the upper guard isn't necessary cuz we have Active Grille Shutters but these guards are completely breathable so, why not.

 

[TimHerald]

For fear of stones hurtling down the highway towards our unprotected radiators, I've installed these guards from Big A "LC250 Grille Guards"
View attachment 43843
Ice learned the upper guard isn't necessary cuz we have Active Grille Shutters but these guards are completely breathable so, why not.
View attachment 43844

how was install? If they are snap on, I want the lower for sure. Link would be appreciated.

 

[DubDub]

… I've installed these guards from Big A "LC250 Grille Guards"…

Link? Interested in the lower. Are they a snap-on product?