🛠️ What Have You Done To Your LC250 Today?

[smokindok]

If you want something that looks more like it came with the truck, you could use this QC3.0 USB dual socket and install 2 or more of them using this replacement switch panel with space for up too 3 additional square (22x22) switches or charge ports. Would look completely OEM.
View attachment 33422
View attachment 33423

That is very nice!

 

[J44]

Added today, Center Console trim cover with side storage. Helpful as not a lot of places to put sunglasses . From StickerFab

 

[Dusty1]

Added today, Center Console trim cover with side storage. Helpful as not a lot of places to put sunglasses . From StickerFab View attachment 33474View attachment 33473

I got one of these for my wife’s LC, it isn’t actually too bad at all. It cleans up easily too, just throw it in the sink with a bit of warm water, soap and then rinse.

 

[midlifeflysis]

Rocco got some new shoes. Found some takeoffs from a GX550 Overtrail.

 

[Insanoflexathf]

Finally managed to get away for some much needed camping.

Also installed a molle rear window panel from Greenlane Offroad. Ordered some mini track recovery boards for the panel.

 

[Matsayz]

Vision Flow wheels with 285/70/18 Nitto Recon Grappler’s. I get a little rub at full lock on an uneven surface but not bad. 275 would’ve been perfect.

Got any pictures showing the poke? I'm looking at these as an alternative to Method 703's... I can't justify double the price

 

[ch78]

Got any pictures showing the poke? I'm looking at these as an alternative to Method 703's... I can't justify double the price

Excellent looking wheel at an excellent price. I'd go with 275/70/18 though. 285’s are rubbing a bit.

 

[MAC25LC]

Had a can of Caliper left from previous vehicle, so painted them today.

 

[PurelyAbrasive]

Today I installed my DD rock lights on the roof rack and wired up the Auxbeam Slim 6. The relay/fuse box wiring was starting to get a little messy and complicated when I wanted to add stuff. I think it all turned out great.

 

[Lenny33]

That fits perfect - nice work!

Did you post a link that I missed? If not, can you post?

 

[YotaJay040524]

What have you done to your Land Cruiser 250 recently?

Bug shield installed

 

[ch78]

Katzkin thanks to the dealer including it in my deal.

 

[RobLS]

Katzkin thanks to the dealer including it in my deal.

Nice. I was going to do the same put I decided against it last minute. I actually found myself enjoying the clutch seats.
I also notice you’re in the Tomball area. Are we basically neighbors? I’m in the Spring/The Woodlands area.

 

[RobLS]

Not that it’s easy to see. Got the car back from getting detailed and having a ceramic coat put on it.
Now I have to put the rack back on, I do want to run without it right now but the drip moulding pieces for the roof is on back order. So to prevent water from getting in, rack is going back on.

 

[ch78]

Nice. I was going to do the same put I decided against it last minute. I actually found myself enjoying the clutch seats.
I also notice you’re in the Tomball area. Are we basically neighbors? I’m in the Spring/The Woodlands area.

Not that it’s easy to see. Got the car back from getting detailed and having a ceramic coat put on it.
Now I have to put the rack back on, I do want to run without it right now but the drip moulding pieces for the roof is on back order. So to prevent water from getting in, rack is going back on.

View attachment 33772

I’m in a weird spot, I have a Tomball address but if I make a left out of my neighborhood I’m in Spring, right is Tomball.

I bought from Haas Country & they had a 1958 on their lot that was lifted (spacer lift) with upgraded wheels/tires and leather. I wasn’t paying 11k for 6k worth of parts/labor for it. We really liked the leather so we made them include it in our deal.

I’m conflicted over removing the rack. Before I added wheels/tires, I was going to remove it so I bought the kit from another forum member. Now I’m thinking about keeping it on. I do like the clean look of it off though. I may remove it just to see if I like it better.

 

[RobLS]

I’m in a weird spot, I have a Tomball address but if I make a left out of my neighborhood I’m in Spring, right is Tomball.

I bought from Haas Country & they had a 1958 on their lot that was lifted (spacer lift) with upgraded wheels/tires and leather. I wasn’t paying 11k for 6k worth of parts/labor for it. We really liked the leather so we made them include it in our deal.

I’m conflicted over removing the rack. Before I added wheels/tires, I was going to remove it so I bought the kit from another forum member. Now I’m thinking about keeping it on. I do like the clean look of it off though. I may remove it just to see if I like it better.

Definitely check it out. If you end up keeping it in though and don’t need the kit and are willing to get rid of it let me know.

And I also meant to include this in my previous post. If anyone in the Houston area is looking for a solid place to get a ceramic coating, ppf and/or tinting put on, Houston Paint Protection is awesome. The guy is super detailed focused, very transparent about prices, coverages of products, how some products work over others, informative about maintenance and taking care of potential issues you may run into in the future.

An employee there also had an old Land Cruiser also in white. Was cool to compare side by side. They said they’ve taken care of several new Land Cruisers and 550’s but so far none of those people had plans to take their vehicles off road. Time to change that!

 

[ultane]

Nice. I was going to do the same put I decided against it last minute. I actually found myself enjoying the clutch seats.
I also notice you’re in the Tomball area. Are we basically neighbors? I’m in the Spring/The Woodlands area.

Is the roundel in your avatar on a motorcycle?

 

[HammerTheWall]

View attachment 33529View attachment 33530

Finally managed to get away for some much needed camping.

Also installed a molle rear window panel from Greenlane Offroad. Ordered some mini track recovery boards for the panel.

Is the molle rear window panel mounted on the stock Toyota roof rack?

 

[RobLS]

Is the roundel in your avatar on a motorcycle?

It is. I had a bmw 1250 gs adventure. It was taken after we did a mud run in the forest north of us. I thought the shot looked cool and is a great juxtaposition to how the brand is typically seen.

 

[KingexporterLC]

Added 50hp. (Installing a grille badge on this thing is a pain!!!)

View attachment 30659

I bought the same one but am yet to install it since the bolts mine came with are way too short to use without a bunch of extra work.. hence why you said it's a pain!!! need the extra 50HP though, so any tips let me know lol