🛠️ Member Build FifthToyota's Ride

Member Build
Nice narrative on your journal...

Please keep us posted on further developments.
 
11/01/25 - Short trip to the top of Mt. Tamalpais to catch the sunrise. Took a few shots on the way back down Ridgecrest Blvd. and Alpine Dam.
110125_MtTamSunrise0654.webp
110125_Ridgecrest2.webp
110125_Ridgecrest1.webp
110125_Ridgecrest3.webp
110125_AlpineDam.webp
 

Attachments

  • 110125_Ridgecrest1.webp
    110125_Ridgecrest1.webp
    265.6 KB · Views: 124
  • 110125_Ridgecrest2.webp
    110125_Ridgecrest2.webp
    234.2 KB · Views: 116
11/15/25 - Spotted some corrosion forming on the brackets of my Westcott Designs Full Length Modular Roof Rack. The rest of the rack is fine, just the brackets. Will be reaching out to them after the holidays for a solution.
111525_Westcott Front Bracket Left.webp
111525_Westcott Front Bracket Right.webp
111525_Westcott Bracket.webp
 
11/15/25 - All Black Heritage Badge Installed. (StickerFab: Premium Standard Tri Bar Grille Badge, 2024+ Land Cruiser, All Black Scheme)
111525_Badge2.jpg
111525_Badge1.jpg
 
Last edited:
It sat in my hallway for about two months but today was the day. Easy assembly and 90 minutes total to install. Minimal jackassery. Although we're not sure how to use the beer openers. We're all covered in beer now. :ROFLMAO:
 

Attachments

  • IMG_3547.webp
    IMG_3547.webp
    389.1 KB · Views: 161
It sat in my hallway for about two months but today was the day. Easy assembly and 90 minutes total to install. Minimal jackassery. Although we're not sure how to use the beer openers. We're all covered in beer now. :ROFLMAO:
Hey congratulations! Your 3/4 rack turned out great! Nice work. I didn't bother with the bottle openers, never had a need, and prefer the streamlined look without.
 
11/23/25 - Preparing for winter. Yakima FatCat EVO 6 Premium Ski & Snowboard Mount (8003096) installed.
112325_YakimaFatCat1.jpg

112325_YakimaFatCat2.jpg
112325_YakimaFatCat3.JPG
 
Last edited:
12/07/25 - Windshield Silicone Strips installed. Top of drivers side strip didn’t want to stick, but a little dab of glue got it down. Cosmetically it looks great, but I did not notice any reduction in wind noise.
120725_Windsheild Strip1.webp
120725_Windsheild Strip2.webp
 
12/26/25, 12273 miles - First rock chip to the windshield on the lower driver corner that immediately formed a crack. Took a full day to arch to the bottom. Not planning to replace the windshield for this one.
12:2625_Crack1.webp
122725_Crack2.webp
 
12/26/25 - Georgetown, CA
122625_Georgetown.webp
 
12/26/25 - Uncle Toms Cabin
122625_UncleTomsCabin1.webp

122625_UncleTomsCabin2.webp
 
12/26/25 - 11 Pines Road above the Rubicon River
122625_11PinesRoad.webp
 
01/02/26 - First door ding on front passenger side door. It's nasty. Most of the scuff buffed out, but the paint is scratched, and it’s dented at the body line. People fucking suck!
010226_FirstDoorDing1.webp
010226_FirstDoorDing2.webp
010226_FirstDoorDing3.webp
 
01/05/26 - Contact initiated with Westcott Designs regarding corrosion spotted on the roof rack brackets on 11/15/25. They said they will be sending new brackets.
 
01/19/26, 14,297 miles - Average lifetime gas mileage after 12 months and 9 days of use: 15.6 MPG (never reset)
011926_15point6MPGLifetimeOneYear.jpg
 
02/17/26 - Received the replacement brackets from Westcott Designs. Planning to spray the new brackets with an extra layer of Rustoleum for additional corrosion protection before replacing.
021726_NewReplacementWestcottBrackets.webp
 
02/22/26, 15,127 miles - 15k DIY Oil Change. Did not do the 5-way tire rotation because of recent surgery limiting how much weight I can carry.
 
Really appreciate this detailed thread. Great photos.

May I ask why you ultimately landed on Westcott's roof rack vs the competition? I'm also curious what you're doing for rooftop storage long term, I'm wondering if I go pelican boxes or an alternative. Currently in the market for both.
 
Supporting Vendors View all →
StickerFab
Back
Top Bottom