Strange Braking Issue (not brake regen or reverse brake squeal)

hdx

Member
Joined
Jul 24, 2026
Messages
31
Media
17
Reaction score
49
Location
California
Super strange incident the other day. Had to stomp on my brakes on the freeway and afterwards, it felt like anytime I got off the accelerator the car would be braking by itself. There would be a small lurch as if the regenerative braking was active, even though the brake pedal was not pressed. The car wouldn't coast like it used to. The brake light display on the dash did not pop up (Proactive Driving Assist (PDA) is also turned off), so it wasn't a stuck pedal.

However what was more concerning was when coming to a stop, the brake pedal felt fairly spongy and would be an audible clicking towards the end of the pedal depression (could also feel clicking/vibration as well). There was also an additional clicking noise that seemed to come underneath the steering wheel column. No ABS lights or any error lights on the dash.

I thought it was a brake line leak due to the loss of brake pressure but there were no leaks and brake fluid reservoir was full. After letting the car sit for a little while, everything seemed to return back to normal.

I was wondering if anyone else had encountered something similar, or may have any idea what happened? Maybe something to do with the electro-hydraulic brake actuator that the LC has?

Car is still on original brakes calipers/pads/fluid, nothing has been changed at all besides the brake pad retaining clip
 
Sounds like a service visit to the stealership is on your horizon. You could try searching braking problems for clues. However, that sounds like a problem.
Good luck !
 
Sounds like a service visit to the stealership is on your horizon. You could try searching braking problems for clues. However, that sounds like a problem.
Good luck !
Thanks, I was planning on bringing it in if the issue returned but it's been behaving since. I figured it would be a waste of time if there were no codes and the problem can't be reproduced/appreciated during their inspection.
 
Sounds like your brakes were dragging, which will heat the fluid up eventually and lead to spongy brakes. Check your rotors for signs of glazing brownish tint on the rotor face or when more severe, you'll start to see signs of metal fatigue (multi-colored narrow color bands).

If a rotor or rotors have glazing, the pads have to come off and either have the glazing sanded off of pads or replaced and rotors will need polished, turned or replaced to remove the glazing on them.

If they are glazed from dragging the biggest concern is why they did, something either got damaged or isn't right with the system. If they are all glazed, it's ABS/Master related.
 
Super strange incident the other day. Had to stomp on my brakes on the freeway and afterwards, it felt like anytime I got off the accelerator the car would be braking by itself. There would be a small lurch as if the regenerative braking was active, even though the brake pedal was not pressed. The car wouldn't coast like it used to. The brake light display on the dash did not pop up (Proactive Driving Assist (PDA) is also turned off), so it wasn't a stuck pedal.

However what was more concerning was when coming to a stop, the brake pedal felt fairly spongy and would be an audible clicking towards the end of the pedal depression (could also feel clicking/vibration as well). There was also an additional clicking noise that seemed to come underneath the steering wheel column. No ABS lights or any error lights on the dash.

I thought it was a brake line leak due to the loss of brake pressure but there were no leaks and brake fluid reservoir was full. After letting the car sit for a little while, everything seemed to return back to normal.

I was wondering if anyone else had encountered something similar, or may have any idea what happened? Maybe something to do with the electro-hydraulic brake actuator that the LC has?

Car is still on original brakes calipers/pads/fluid, nothing has been changed at all besides the brake pad retaining clip
Was the car pulling to one side when it decelerated? Could you feel any torque in the steering wheel?
If not, best guess would be brake servo, maybe wheel speed sensor.
Dtc for brakes dont typically show up on cheaper obd2 scan tools. Plus if the malfunction is within tolerance, there wont necessarily be a dtc.

One thing to consider when the fault occurs is that the esp will do what it needs to keep the car on its steered path, so the underlying condition can be masked by esp/abs doing its thing.
 
Last edited:
  • Like
Reactions: hdx
Super strange incident the other day. Had to stomp on my brakes on the freeway and afterwards, it felt like anytime I got off the accelerator the car would be braking by itself. There would be a small lurch as if the regenerative braking was active, even though the brake pedal was not pressed. The car wouldn't coast like it used to. The brake light display on the dash did not pop up (Proactive Driving Assist (PDA) is also turned off), so it wasn't a stuck pedal.

However what was more concerning was when coming to a stop, the brake pedal felt fairly spongy and would be an audible clicking towards the end of the pedal depression (could also feel clicking/vibration as well). There was also an additional clicking noise that seemed to come underneath the steering wheel column. No ABS lights or any error lights on the dash.

I thought it was a brake line leak due to the loss of brake pressure but there were no leaks and brake fluid reservoir was full. After letting the car sit for a little while, everything seemed to return back to normal.

I was wondering if anyone else had encountered something similar, or may have any idea what happened? Maybe something to do with the electro-hydraulic brake actuator that the LC has?

Car is still on original brakes calipers/pads/fluid, nothing has been changed at all besides the brake pad retaining clip
Go to the dealership & leave it with them.
That’s not a typical brake health check. Instead a diagnosis w/ Texhstream of the ABS/Skid Control ECU.

When we step on the brakes in a LC there us a Brake Pedal Stroke Sensor that tells the ECU how much brake force the vehicle needs between regen & hydraulic brakes. There is an accumulator that then applies the hydraulics. In a panic stop a lot is going on. I’d start having them do a system diagnosis.

Similar, in commercial aviation the manufacturer specs require a post-event check on an airframe immediately after a high-energy or rejected take-off braking event. Good to check things over being easy to exceed working temp limits. If the aircraft is good, credit is given to the plane for being robust. When something comes up broke, blame flows quick to us up front in the pointy end.
 
Was the car pulling to one side when it decelerated? Could you feel any torque in the steering wheel?
If not, best guess would be brake servo, maybe wheel speed sensor.
Dtc for brakes dont typically show up on cheaper obd2 scan tools. Plus if the malfunction is within tolerance, there wont necessarily be a dtc.

One thing to consider when the fault occurs is that the esp will do what it needs to keep the car on its steered path, so the underlying condition can be masked by esp/abs doing its thing.
The car was driving straight, even during the panic stop. No fishtailing at all. The ABS light didn't pop up during the panic stop either, but the stop was more of a moderate braking from 75 to 55 rather than a full on brake.

No discernible issues in steering and nothing was felt in the steering wheel afterwards
 
Sounds like your brakes were dragging, which will heat the fluid up eventually and lead to spongy brakes. Check your rotors for signs of glazing brownish tint on the rotor face or when more severe, you'll start to see signs of metal fatigue (multi-colored narrow color bands).

If a rotor or rotors have glazing, the pads have to come off and either have the glazing sanded off of pads or replaced and rotors will need polished, turned or replaced to remove the glazing on them.

If they are glazed from dragging the biggest concern is why they did, something either got damaged or isn't right with the system. If they are all glazed, it's ABS/Master related.
It sounds like the brakes were dragging to me as well. I drove for about 10 minutes after the panic stop. The rotors look okay for 25k miles.

What sticks out to me is that the braking feels exactly the same after letting the car sit and there has been no recurrence since

IMG_0974.webp
 
Back
Top Bottom