1HZ oil leak at back of cylinder head

Lanza_1

New member
Joined
Nov 19, 2026
Messages
1
Reaction score
0
Location
Perth
Vehicles
HZJ79R
I have 79's with the 1HZ motor. I notice there's an oil leak at the back of the cylinder head area.
It's hard to tell if it is coming from the intake manifold or the cylinder head.
Wondering if anyone else has recently had this problem.
The motor has 272 000 km on the clock.
 

Attachments

  • IMG_9616.webp
    IMG_9616.webp
    182.1 KB · Views: 3
  • IMG_9617.webp
    IMG_9617.webp
    105.6 KB · Views: 2
Kind of hard to tell what I'm looking at in the photo. Looks sort of like a valve cover gasket maybe?
 
Looks like the intake manifold has a leak on cylinder six. You can verify head gasket and or head warpage at cylinder six with compression checks.

You may be able to verify the intake manifold leak by spraying ether or brake cleaner around the area, but it may be inconclusive since it's a diesel and doesn't pull vacuum.

If you can't do either test, I'd replace the intake manifold gasket first as the easiest and cheapest possible fix and the pictures suggest to me that the intake manifold is the source as the head gasket isn't going to migrate up onto the intake runner.
 
Last edited:
Kind of hard to tell what I'm looking at in the photo. Looks sort of like a valve cover gasket maybe?
Photo 1 is the head to block interface and Photo 2 is the intake manifold at cylinder six on the head between 5 and 6.
 
@Scrappopatamus , I probably wouldn't have either if I didn't have a 1HD-T where all these items are in common. Those two engines are nearly identical except for the lack of a turbo on the 1HZ.
 
Back
Top Bottom