BBS TRD Pro wheel fitment (285/65-18 Falkens)

I have AT4
I stalked your media and saw that. I mentioned this above, but it's still true. I fell in love with these Falkens already and would definitely give them a shot again, but they don't offer the AT4 in a 275/70 SL load. If they did, I'd be sold.
 
This my AT 4 SL 265/18
 

Attachments

  • IMG_5410.webp
    IMG_5410.webp
    247 KB · Views: 148
  • IMG_5458.webp
    IMG_5458.webp
    258.3 KB · Views: 153
  • IMG_5457.webp
    IMG_5457.webp
    530.7 KB · Views: 145
Well, just stumbled into some 25 mile takeoffs for $1,500. Done deal, I didn’t even haggle.

They have the OE rubber (Falken Wildpeaks in 285/65-18). Same diameter as the LC’s 265/70-18, but .8” wider.

My question: I hate wasting good rubber that’ll get me 20k miles at OE height. Curious if anyone else has run this size and could share any potential fitment concerns. I’m aware I’ll be poking a little on my 1958 fenders, so really only asking about turn rubbing.
soooo freaking jealous. Congrats!
IMG_1241.jpeg
 
I just scored a set for $500 with tires and have been super happy with them so far! No rubbing at all. Hoping they don't look too tiny when the 2.5" King suspension gets installed front and rear.View attachment 67770
That’s a literal steal of a deal. $1,500 on mine was still a great deal. Congrats!
 
Congrats on the score. I realize you payed $1000 too much obviously, so being the nice forum member that I am, I will give you the $1500 you invested along with a good (EXCELLENT) bottle of Bourbon. I've been thinking about picking up another set for my TRD PRO
 
You guys are killing me! What an incredible find. I hunted everywhere and could not find a good deal - purchased mine from Ed Martin Toyota. I do love them and wouldn't trade them for anything else. I did some research on BBS and its very high quality wheel. Not sure if this has any effect on the way my LC drives, but even lifted and on 35's it drives like a dream.
 
You guys are killing me! What an incredible find. I hunted everywhere and could not find a good deal - purchased mine from Ed Martin Toyota. I do love them and wouldn't trade them for anything else. I did some research on BBS and its very high quality wheel. Not sure if this has any effect on the way my LC drives, but even lifted and on 35's it drives like a dream.
I’m in the same exact location as you, yes it was impossible and I had literally given up. Every time a set popped up they were claimed within 10 minutes. I finally just got lucky looking for something completely unrelated.

$500 though… that’s unreal
 
Well, this morning I did discover one fitment issue with the 285/65 Falkens. Aired down to 20psi and started climbing the access point onto the beach when I started feeling some resistance and hearing a pulsing rub. Though top deformation is minimal when aired down, the Falkens were rubbing all over the knuckle as the front suspension was shifting load left-to-right. No issue once back up to 24psi over the dune and while doing my quick pass.

Sorry for not having photos, I was jamming up the access point resolving the issue and didn’t even think to capture it. I’ve never really considered top deformation when aired down, but I guess it makes sense on independent links. Not worried about it, but figured I’d share.
 
Well, this morning I did discover one fitment issue with the 285/65 Falkens. Aired down to 20psi and started climbing the access point onto the beach when I started feeling some resistance and hearing a pulsing rub. Though top deformation is minimal when aired down, the Falkens were rubbing all over the knuckle as the front suspension was shifting load left-to-right. No issue once back up to 24psi over the dune and while doing my quick pass.

Sorry for not having photos, I was jamming up the access point resolving the issue and didn’t even think to capture it. I’ve never really considered top deformation when aired down, but I guess it makes sense on independent links. Not worried about it, but figured I’d share.
Damn.
Thanks for the update Dub.
I’ve not aired down that low yet.
Will keep an eye on this.
 
Well, this morning I did discover one fitment issue with the 285/65 Falkens. Aired down to 20psi and started climbing the access point onto the beach when I started feeling some resistance and hearing a pulsing rub. Though top deformation is minimal when aired down, the Falkens were rubbing all over the knuckle as the front suspension was shifting load left-to-right. No issue once back up to 24psi over the dune and while doing my quick pass.

Sorry for not having photos, I was jamming up the access point resolving the issue and didn’t even think to capture it. I’ve never really considered top deformation when aired down, but I guess it makes sense on independent links. Not worried about it, but figured I’d share.
Hey there,
Glad not a large issue and all was fine after inflating a bit. I am curious, being familiar with the area and having driven on that sand over the years in 4Runners,, do you find it absolutely necessary to air down like that? Asking because I have not even had mine on sand yet....I know do not make fun me! I baby this thing and I need to put it to use, but I hear our LC's really excel in the sand and basically drive over it like its pavement, so wasn't sure if you need to air down, or being mandatory by county are you just doing what the signs say, as well as just making sure there is no chance of getting stuck? I've been stuck down on Hatteras Island. No fun.
 
Hey there,
Glad not a large issue and all was fine after inflating a bit. I am curious, being familiar with the area and having driven on that sand over the years in 4Runners,, do you find it absolutely necessary to air down like that? Asking because I have not even had mine on sand yet....I know do not make fun me! I baby this thing and I need to put it to use, but I hear our LC's really excel in the sand and basically drive over it like its pavement, so wasn't sure if you need to air down, or being mandatory by county are you just doing what the signs say, as well as just making sure there is no chance of getting stuck? I've been stuck down on Hatteras Island. No fun.
As a resident permit holder I just follow the posted rules. If I violate them then the tourons see it and think it’s ok, then they get stuck and tear up my favorite getaway spot. With the horses up there the peninsular resident are trying to get the county to close the drive-on beach and I’d hate to contribute to their success. It depends of time of season and recent weather if 20psi is justified or extreme. I could have gotten away without deflating yesterday following recent rains.

I want to say the rules down here are 20psi and 4x4. I got over the first hump and aired up a little to 24. Did my pass mostly just listening and trying to push knuckle contact. Then exited up top and aired up. I was’t going to stay on sand when a bunch of people saw me air back up.
 
These popped up today in Virginia Beach, just incase anyone close to me is looking. Won’t last long.

Facebook
 
These popped up today in Virginia Beach, just incase anyone close to me is looking. Won’t last long.

Facebook
That is an incredible deal. Wheels alone an incredible deal but a set of KO3's too all for $1795!!
Thanks for posting - I don't need but someone should grab these up.
 
Back
Top Bottom